Tuesday, March 22, 2011
Hubby and I had been using this for almost 7 years now. And it does worked on us pretty good. I've been hearing from my relatives alone that they pay a lot for their electric bills. But I would tell you guys if you have this small gadget you will amaze how it works for you and your pocket, ^_^ And for the record we are selling this so if anyone wants to inquire message me.
Rate Voltage: 110-250VAC, 50Hz / 60Hz
Working Temperature: -15 degree to 60 degree
Single phase model
Use one POWER STAR Saver for every 18, 000 watts
The device must be plugged in firmly. Avoid loose connections.
This device can store electrical charge, wait for 10 seconds after the electrical supply is switched off before unplugging the device.
Keep away from children.
Do not tamper, open or repair the POWER STAR Saver by yourself, call your dealer or distributor for service.
This device operates by adjusting the power factor of the incoming supply into your house. For it to work optimally, it should be installed as close as possible to the opint of entry of your electricity supply so as to detect all loads before the meter and adjust the power factor accordingly, if it is installed too far down into the circuit, it will not be able to affect the electricity supply to other appliances ahead of it.
Most effective with inductive receivers (Motors, transformers, fluorescent lighting, etc. )
Reduces wave form distortions.
No movable parts.